The UNIVERSAL 60 Charger/Analyzer: Provides economical and uncomplicated maintenance for any battery that can be charged using constant current or constant potential, including vented nickel-cadmium and vented or sealed lead-acid aircraft batteries. The UNIVERSAL 60 is a single output unit that draws from over 25 years of experience and success of the RF80 series/p>

• Flowchart indicates required settings
• Easy-to-use and easy-to-see controls
• Original settings retained for next task
• Up to 60 Amps for constant current charge/discharge
• Services both Ni-Cd and Lead-Acid batteries
• Fully integrated battery temperature protection
• Readily applicable to a wide variety of battery types
• Self-Calibration reduces downtime and service charges
• Proven system for 25 years of RF80 experience
• Built with Christie's tradition of reliability and durability

Size:
18.5" (47.1 cm) wide × 21.5" (54.6 cm) deep × 11" (27.9 cm) high

Size Cabinet:

17"(43.2cm) wide × 20.8" (52.3cm) deep × 1.25"(26cm) high

Net weight:
145 pounds (65.9 kg)

Front Panel Material:
Steel with polyester overlay

Case material:
Steel

Voltage:
110, 208, 220 VAC

Frequency:
50/60 Hz

Current Requirements:
25A maximum at 220 VAC Input

Power Switch:
Opens both sides of line

Constant Current :
1 to 60A, maximum

Constant Current Discharge:
0.2 to 60A

Constant Potential Charge:
75V Maximum

Current :
99.9 full scale, accuracy ±2% of full scale

Voltage:
99.9 full scale, accuracy ±2% of full scale

Individual Cells :
19.9 full scale, accuracy ±2% of full scale

Ambient Temperature:
-40°C to +71°C

Altitude:
0 to 50,000 feet

Ambient Temperature:
0 °C to 50 °C

Altitude:
0 to 8,000 feet

Distributed & Supported By:

CHRISTIE Distribution & Service Center
Marvel Aero International
20381 Lake Forest Drive, Suite B3
Lake Forest, CA 92630 USA
Tel: +1 949 829 8264
Fax: +1 949 829 8394
info@christiecbs.com